EN 
ES_ES 
DE 
RENT
OF EQUIPMENT
SERVICE OF
LABORATORY
We have a complete laboratory for calibration and repair of test instruments with which we provide after-sales support.
SF6 Gas Analysis
GA 11 - SF6 Gas Quality Analyzer
- Indication of the percentage by volume of SF6.
- Display of humidity concentration in ppmv and ppmm and dew point in °C or °F.
- SO2 concentration displayed in ppmv.
- Display of inlet pressure in bar, Pa, pe, psi, kPa, or MPa.
- Automatic identification of the remaining service life of sensors.
GIR 10 – SF6 Gas Detector
- Detection of trace concentrations as low as 0.6 ppmv
- It reacts exclusively to the presence of SF6 gas; therefore, it is insensitive to moisture and volatile organic compounds (VOCs)
- Easy to use
- Fast response time
- Factory calibration using certified test gases
GVC 10 – Portable Vacuum Compressor for SF6 Gas Extraction
- Extraction until residual pressure is reached
- Free of oils and lubricants
- Very high level of watertightness.
- SF6 purification and filtration during the filling process.
- Cold operation in continuous mode.
GTU 10 – Portable SF6 Gas Transfer Unit
- Recovery of SF6 gas from SF6-insulated equipment.
- Purification and filtration of SF6 during the recovery process.
- SF6 filling using positive pressure.
- SF6 purification and filtration during the filling process.
- Cylinder Consolidation.
- DN8 Coupling Kit.
GVP 10 – Portable Vacuum Pump for Preparing SF6 Gas Cell Filling
For evacuating air or nitrogen to prepare SF6 gas cells for filling.
- Pumping capacity of up to 10 m³/h.
- Achievable final pressure ≤ 0.02 mbar abs.
- Lightweight and compact design.
- Built-in oil check valve and oil mist recirculation.
- Optional precision vacuum gauge.
GPF 10 – Portable SF6 Gas Filter Unit
Module for the maintenance of SF6 gas filling equipment and the treatment of contaminated SF6 gas.
- A filter element for particles, moisture, and decomposition products
- Easy replacement
- High gas flow rate through flow optimization
- Robust and reliable construction
- Corrosion protection provided by the anodized filter housing
HC150 - SF6 Recovery and Maintenance Cart
- Dual vacuum pump with a capacity of 34 m³/h and a ultimate vacuum of less than 1 mbar
- SF6 Compressor, 1 m³/h
- Manual valve assemblies that allow you to change the equipment's operating mode
- Tank for storing liquid SF6 with a capacity of 68 kg
- Recovery rate of 89.9 %
- Drying filter
Shipping costs are the customer's responsibility
SF6 Gas Filling Kit
This device allows a piece of equipment to be filled directly from an SF6 gas cylinder using a pressure differential. It features a pressure gauge that displays the pressure in the cylinder, a manually adjustable pressure regulator, and a secondary pressure gauge with a 10-bar scale that displays the pressure in the chamber.
973-SF6 SF6 Gas Quality Analyzer
The RH Systems Model 973-SF6 analyzer was specifically designed to measure the moisture content and purity of SF₆ in gas-insulated switchgear systems. Moisture measurement data are displayed in ppmv, ppmw, and dew/frost point at system pressure or standard pressure. The purity measurement is displayed directly in % SF₆ volume. Both moisture and purity measurements utilize precise and reliable condensation techniques.
SERVICES / Rental / SF6 Gas Analysis
SF6 GAS ANALYSIS
Specialized equipment for SF6 gas analysis to ensure the efficiency and safety of your electrical systems. We have advanced equipment to measure purity, detect leaks, and perform accurate tests—all available to you whenever you need it.
WIKA
SF6 COUPLERS
We offer SF6 connectors and hoses in a variety of sizes and materials, ensuring safety and protection for both equipment and operators.
SYNECOM
SF6 PLANT
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
ENERVAC
CRYOQUIP
HC 150
The Cryoquip HC 150 is a vacuum compressor designed to efficiently and safely recover and compress SF6 gas in electrical equipment.